RabbitCore RCM3100 Series, Руководство по началу работы

Страница: 21 / 32

Getting Started 17
3.2 Installing Dynamic C
Insert the Dynamic C CD-ROM in the drive on your PC. If autorun is enabled, the CD
installation will begin automatically.
If autorun is disabled or the installation otherwise does not start, use the Windows
Start | Run
menu or Windows Disk Explorer to launch
SETUP.EXE
from the root folder
of the CD-ROM.
The installation program will guide you through the installation process. Most steps of the
process are self-explanatory and not covered in this section. Selected steps that may be
confusing to some users are outlined below. (Some of the installation utility screens may
vary slightly from those shown.)
3.2.1 Program & Documentation File Location
Dynamic C’s application, library and documentation files can be installed in any conve-
nient location on your workstation’s hard drives.
The default location, as shown in the example above, is in a folder named for the version
of Dynamic C, placed in the root folder of the C: drive. If this location is not suitable, enter
a different root path before clicking
Next > . Files are placed in the specified folder, so do
not set this location to a drive’s root directory.