RabbitCore RCM3100 Series, Руководство по началу работы

Страница: 18 / 32

14 RabbitCore RCM3100
2.4 Run a Sample Program
If you already have Dynamic C installed, you are now ready to test your programming
connections by running a sample program.
Find the file
PONG.C
, which is in the Dynamic C
SAMPLES
folder. To run the program,
open it with the
File
menu (if it is not still open), compile it using the
Compile
menu, and
then run it by selecting Run in the Run menu. The STDIO window will open and will dis-
play a small square bouncing around in a box.
This program shows that the CPU is working.
2.5 Where Do I Go From Here?
We recommend that you proceed to the next chapter and install Dynamic C (if you do not
already have it installed), then run the
PONG.C
sample program to verify that the
RCM3100 module and the Prototyping Board are set up and functioning correctly.
If everything appears to be working, we recommend the following sequence of action:
1. Run all of the sample programs described in Section 3.4 to get a basic familiarity with
Dynamic C and the RCM3100 module’s capabilities.
2. For further development, refer to the RabbitCore RCM3100 User’s Manual for details
of the module’s hardware and software components.
A documentation icon should have been installed on your workstation’s desktop; click
on it to reach the documentation menu. You can create a new desktop icon that points to
default.htm in the docs folder in the Dynamic C installation folder.
3. For advanced development topics, refer to the Dynamic C Premier User’s Manual,
also in the online documentation set.
2.5.1 Technical Support
NOTE: If you purchased your RCM3100 series module through a distributor or through a
Z-World or Rabbit Semiconductor partner, contact the distributor or partner first for tech-
nical support.
If there are any problems at this point:
•
Check the Z-World/Rabbit Semiconductor Technical Bulletin Board at
www.zworld.com/support/.
•
Use the Technical Support e-mail form at www.zworld.com/support/.