RabbitCore RCM3100 Series, Руководство по началу работы

Страница: 11 / 32

Getting Started 7
2. H
ARDWARE
S
ETUP
This chapter describes the RCM3100 hardware in more detail, and
explains how to set up and use the accompanying Prototyping Board.
NOTE: This chapter (and this manual) assume that you have the RCM3100 Development
Kit. If you purchased an RCM3100 module by itself, you will have to adapt the infor-
mation in this chapter and elsewhere to your test and development setup.
2.1 Development Kit Contents
The RCM3100 Development Kit contains the following items:
•
RCM3110 module, 256K flash memory, and 128K SRAM.
•
RCM3000/RCM3100 Prototyping Board.
•
AC adapter, 9 V DC, 1 A. (Included only with Development Kits sold for the North
American market. A header plug leading to bare leads is provided to allow overseas
users to connect a power supply compatible with their local mains power.)
•
10-pin header to DE9 programming cable with integrated level-matching circuitry.
•
Dynamic C SE CD-ROM, with complete product documentation on disk.
•
This Getting Started manual.
•
A bag of accessory parts for use on the Prototyping Board.
•
Registration card.