RabbitCore RCM2100, Руководство по началу работы

Страница: 11 / 47

Getting Started 7
2. H
ARDWARE
S
ETUP
This chapter describes the RCM2100 series hardware in more
detail, and explains how to set up and use the accompanying
prototyping and development board.
NOTE: This chapter (and this manual) assume that you have the RabbitCore RCM2100
Development Kit. If you purchased an RCM2100 series module by itself, you will have
to adapt the information in this chapter and elsewhere to your test and development
setup.
2.1 Development Kit Contents
The RCM2100 Development Kit contains the following items:
•
RCM2100 module with Ethernet port, 512K flash memory and 512K SRAM.
•
RCM2100 Prototyping Board with accessory hardware and components.
•
Wall transformer power supply, 12 V DC, 500 mA. (Included only with Development
Kits sold for the North American market. Overseas users will have to substitute a
power supply compatible with their local mains power.)
•
10-pin header to DE9 programming cable with integrated level-matching circuitry.
•
Dynamic C SE CD-ROM, with complete product documentation on disk.
•
This Getting Started manual.
•
Registration card.