RabbitCore RCM2100, Руководство по началу работы

Страница: 27 / 47

Getting Started 23
If you are using Dynamic C version 7.04 or earlier, modify the BIOS source code as fol-
lows. Skip these three steps if your version of Dynamic C is 7.05 or later.
1. Open the BIOS source code file named
RABBITBIOS.C
, which can be found in the
BIOS
directory.
2. Change the line
#define USE115KBAUD 1 // set to 0 to use 57600 baud
to read as follows.
#define USE115KBAUD 0 // set to 0 to use 57600 baud
3. Save the changes using
File > Save
.
Now press
<Ctrl-Y>
. You should receive the “BIOS successfully compiled …” message
indicating that the target is now ready to compile a program. You should then continue
with the sample programs in the next chapter.