![background image](http://html1.mh-extra.com/html/rabbit/rabbitcore-rcm4100/rabbitcore-rcm4100_user-manual_3119422045.webp)
User’s Manual
41
4.5 Other Hardware
4.5.1 Clock Doubler
The clock doubler on the RCM4100 is disabled by default.
4.5.2 Spectrum Spreader
The Rabbit 4000 features a spectrum spreader, which helps to mitigate EMI problems. By
default, the spectrum spreader is on automatically, but it may also be turned off or set to a
stronger setting. The means for doing so is through a simple global macro as shown below.
NOTE:
Refer to the
Rabbit 4000 Microprocessor User’s Manual
for more information
on the spectrum-spreading setting and the maximum clock speed.
1. Select the “Defines” tab from the Dynamic C
Options > Project Options
menu.
2. Normal spreading is the default, and usually no entry is needed. If you need to specify
normal spreading, add the line
ENABLE_SPREADER=1
For strong spreading, add the line
ENABLE_SPREADER=2
To disable the spectrum spreader, add the line
ENABLE_SPREADER=0
NOTE:
The strong spectrum-spreading setting is not recommended since it may limit
the maximum clock speed or the maximum baud rate. It is unlikely that the strong set-
ting will be used in a real application.
3. Click
OK
to save the macro. The spectrum spreader will now remain off whenever you
use the project file where you defined the macro.
Содержание RabbitCore RCM4100
