Distributor of Digi International: Excellent Integrated System Limited
Datasheet of 20-101-1194 - MODULE RABBITCORE RCM3309 ROHS
Contact us: [email protected] Website: www.integrated-circuit.com
12
RabbitCore RCM3309/RCM3319
2.2.3 Step 3 — Connect Power
When all other connections have been made, you can connect power to the Prototyping
Board.
First, prepare the AC adapter for the country where it will be used by selecting the plug.
The RCM3909/RCM3319 Development Kit presently includes Canada/Japan/U.S., Aus-
tralia/N.Z., U.K., and European style plugs. Snap in the top of the plug assembly into the
slot at the top of the AC adapter as shown in Figure 3, then press down on the spring-
loaded clip below the plug assembly to allow the plug assembly to click into place.
Connect the AC adapter to 3-pin header J2 on the Prototyping Board as shown in Figure 3.
Plug in the AC adapter.
The red
CORE
LED on the Prototyping Board should light up
. The
RCM3309/RCM3319 and the Prototyping Board are now ready to be used.
NOTE:
A
RESET
button is provided on the Prototyping Board to allow a hardware reset
without disconnecting power.
19 / 191
19 / 191