Distributor of Digi International: Excellent Integrated System Limited
Datasheet of 20-101-1194 - MODULE RABBITCORE RCM3309 ROHS
Contact us: [email protected] Website: www.integrated-circuit.com
170
RabbitCore RCM3309/RCM3319
rn_write
int rn_write(int handle, int regno, char *data, int datalen);
DESCRIPTION
Writes a string to the specified device and register. Waits for results.
This function will
check device information to determine that the peripheral card is connected to a master.
PARAMETERS
handle
is an address index to device information. Use
rn_device()
or
rn_find()
to establish the handle.
regno
is the command register number as designated by each device.
data
is a pointer to the address of the string to write to the device.
datalen
is the number of bytes to write (0–15).
NOTE:
A data length of 0 will transmit the one-byte command register number.
RETURN VALUE
The status byte from the previous command.
-1 means that device information indicates the peripheral card is not connected to the
master, and -2 means that the data length was greater than 15.
SEE ALSO
rn_read
177 / 191
177 / 191