manualshive.com logo in svg
background image

 

14

5. Governor Oil 

Detach the oil pump, and continue to refill oil until oil comes out from the bolt hole, as 
illustrated on the right (once a year). 
 

Automobile Mobil Oil :

  SAE#30, #20 (in winter) 

Specified level 50 ml 

 

Note:

  Under cold weather in winter, it is recommended to use SAE5W30 or 

SAE10W30 or other types of lubricating oil adapted for operation under cold 
weather. 

 

 

 

6. Search Light

 (Option) 

When using the search light during engine stop, it is possible to operate it by battery.    In 
this case, change the connection of one line on the back of the receptacle according to the 
wiring diagram in P. 20. In this connection, the battery discharges much. Be sure to check 
the battery level. 
 
 
 
 

PUMP

 

 

1. Water Suction Port Strainer

 

After the pump is operated for water containing alga, clear the alga of the water 
suction strainer. 
 
 

 
 
 

 

 

2. Vacuum Pump Strainer 

After the pump is operated for water containing dirt,

 

sand or alga, detach the 

strainer cap, and clean the strainer. 
 
 
 
 
 
 
 

3. Adjustment and Replacement of Vacuum Pump Driving V-belt

 

 
(1) If the belt does not run regularly, adjust the belt retainer. 

(2) If the belt is extended, the belt tension can be adjusted to some degree by 

shifting the tension pulley. If the belt tension cannot be controlled or the belt 
is damaged, replace it with a new one. (Belt used: A-29 V-belt) 
 
 
 
 

 

Vacuum Pump 
V-belt

 

Vacuum Pump Strainer 

Chamber

Vacuum Pump   

Strainer 

Vacuum Pump 
Strainer Cap

 

Water Suction Port

Water Suction
Port strainer

 

Содержание P455SM

























Отзывы: