![background image](http://html2.mh-extra.com/html/rab-lighting/sr2/sr2_installation-instructions_3060246003.webp)
INSTRUCTIONS
FIELD-ADJUSTABLE SR™ INSTALLATION
RAB Lighting is committed to creating high-quality, aff ordable, well-designed and energy-effi cient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
CONTINUOUS RUN MOUNTING
(multiple fi xtures can be mounted together)
For Surface Mounting
(Multiple fi xture wiring kit sold separately, CAT# SR JOIN KIT)
1. Press and hold the
Release Buttons
(4)
on both sides of the
Fixture Housing
to release the
Lens
(Fig. 1)
. When pressing the
R
elease Buttons
use one hand to hold the
Lens
and press the
Release Buttons
on both sides of the
Fixture
with the other
hand.
CAUTION: The Lens may drop out quickly
. Lens
is
supported with
(2)
Tether Cables
(Fig. 3).
2.
Use a screwdriver to open the
Knockout Hole
and install
the Wire Guard
(provided with Junction Box Cover Plates)
to
protect wires from sharp edges
(Fig. 7).
3.
Attach both
Junction Box Cover Plates
to the
Fixture Housing
by sliding in the direction of arrows as shown in Fig. 2. Secure
with (4)
Screws
(provided)
. Only one Fixture needs to be
electrically hardwired from above.
4.
Feed supply wires through
Wire Access Hole
(Fig. 6)
. Secure
Fixture Housing
to junction box or building structure.
5. Make electrical connections as shown in wiring diagram
(Fig. 12)
. Use approved wiring connectors and wire to local NEC
codes. Push all wires back into
Fixture Housing
. Be careful not
to pinch wires.
6.
Snap Lens back into Fixture Housing and remove protective
plastic from Lens.
CAUTION:
The maximum number of fi xtures allowed to be
linked together is indicated in the table below
(Fig. 9).
WARNING: To prevent wiring damage or abrasion, do not
expose wiring to sharp objects.
For V-Hook/Chain Mounting
(Multiple fi xture wiring kit sold separately, CAT# SR JOIN KIT)
1.
Use a screwdriver to open the
Knockout Hole
and install
the
Wire Guard
(provided with Junction Box Cover Plates)
to
protect wires from sharp edges
(Fig. 7)
.
2. Install
Joiner Bracket
to connect multiple fi xtures together
and secure with
(8)
Screws
(Fig. 8)
.
3.
Connect the
Chains
to the mounting surface and hang
Fixture from the V-Hooks as shown in Fig. 5
4. Fixture mounting height and spacing should be determined
by application requirements
. V-Hook
and
Chain
is suitable to
support four
(4)
times the weight of the fi xture.
5. Press and hold the
Release Buttons
(4)
on both sides of the
Fixture Housing
to release the
Lens
(Fig. 1)
. When pressing the
Release Buttons
use one hand to hold the
Lens
and press the
Release Buttons
on both sides of the Fixture with the other
hand.
CAUTION: The Lens may drop out quickly
.
Lens
is
supported with
(2)
Tether Cables
(Fig. 3)
.
6. Make electrical connections as shown in wiring diagram
(Fig. 12)
. Use approved wiring connectors and suitable conduit
(not provided)
. Wire to local NEC codes. Be careful not to pinch
wires.
7.
Snap
Lens
back into
Fixture Housing
and remove protective
plastic from
Lens
.
WARNING: To prevent wiring damage or abrasion, do not
expose wiring to sharp objects.
Catalog #
SR2
SR4
SR8
Maximum Number of Linked Fixtures
Up to
27
fi xtures
Up to
13
fi xtures
Up to 9 fi xtures
CAUTION:
The maximum number of fi xtures allowed to be
linked together is indicated in the table below
(Fig. 9)
.
Fig: 6
Fig: 7
Fig: 8
Fig: 9
Wire Guard
Joiner Bracket