Connect Power to the
Base Station
Connect the power adapter included
with your SoundAlert System to a
suitable standard wall receptacle
(120 VAC, 60 Hertz power outlet). Plug
the 9VDC end into the power jack on
the SoundAlert Base Station rear panel.
Wall Mounting Base Station
Screw in 2 screws 4 5/16” apart on a
level plane, making sure to allow screw
heads to protrude 1/8”. Position Base
Station’s keyhole slots over screws and
slide down to secure.Template is
provided for wall attachment.
Base Station Controls
5
Base Station Set-Up
Power/
Message
LED
Microphone
hole
Antenna
Set-up
LED
Low Battery
LED
Playback
Button
Volume
Control
Knob
Power
Jack
9VDC end
Power
Adapter
Slide Switch with
Run, Record &
Program positions
Message
Buttons
On/Off
Switch
Pre-Recorded Messages
SoundAlert comes with the following
Pre-recorded messages:
1. “Driveway”
2. “Front Door”
3. “Backdoor”
4. Ding Dong
5. Buzzer
6. Barking Dog
Your SA12 comes with 2 Sensor/
Transmitters (SA24 comes with 4
Sensor/Transmitters) The’re labeled
on the back with a number that corre-
sponds to the prerecorded message.
For example, the
sensor with #1 on
back will announce
“driveway” for
each detection.
Playback Volume
RUN
RECORD PROGRAM
OFF ON MIC PWR/MSG SETUP LOW BATTERY
Keyholes slide over screws
for Wall Mounting
4
Why the RAB SoundAlert System is Right for You
It tells you when and where someone’s coming.
Simply put the wireless Sensor/Transmitters wherever you want and you
will be notified by a voice message when activity has been sensed in that
area. It’s the easiest and most thorough monitoring device you will ever
own!
Great for Home or Business!
It’s like having a 24/7 security staff that never sleeps.
Add motion activated detection all around your home and business.
“Pool” “Boat” “Back Door” “Front door” “Driveway”
“Parking “Storage “Loading “Main “Outdoor “North
area” area” dock” entrance” storage area” fence”
Residential
Commercial
5
SA Manuel.indd 5
4/29/05 3:06:46 PM