14
Troubleshooting
continued
Message Buttons Won’t
Playback Message
• Make sure the slide switch is in
“RUN” position
• Check the connection to the Base
Station power
Sensor/Transmitter Battery Goes
Dead In A Short Time
• Check that the power saver W1
and VR1 (Page 7, Setting Up The
Sensor/Transmitter Battery
Savers) have been reset. Adjust
these if necessary and replace
battery with a new one.
15
Limited Warranty
Your SoundAlert will be promptly
replaced or repaired, at our option, if it
proves to be defective in workmanship
or materials within 1 year of purchase.
For repair or replacement, please call
the Tech Help Line at 888 RAB-1000
for instructions.
If your SA12 or SA24 kit is out of
warranty or damage is unrelated to its
original manufacture, return your
unit freight prepaid to the address
on the back of this manual. Please
include a description of the problem
and a check for $75. for the SA12
kit or $100. for the SA24 kit (made
out to RAB Lighting). We will repair
or replace your unit promptly.
Under no circumstances shall RAB
be liable for any incidental or conse-
quential damages arising out
of or in connection with the use or
performance of this product or other
indirect damages with respect to loss
of property or revenue or cost of
installation, removal or re-installation.
This warranty gives you specific legal
rights and you may also have other
rights which vary from state to state.
SoundAlert is designed to detect
people or cars in the detection area.
It should not be construed as a theft
or crime prevention device. RAB
does not accept responsibility for any
damages resulting from intrusion or
other crimes.
Toll Free
Technical Assistance
If you need technical assistance,
please do the following:
1. Re-read the Troubleshooting section
of this manual.
2. Call the Tech Help Line
at 888 RAB-1000, 8AM to 6PM
Eastern Time M-F and we will be glad
to help you.
14
SA Manuel.indd 14
4/29/05 3:06:51 PM