R82 Caribou, Руководство пользователя

Страница: 26 / 148

26
support.R82.org
EN
ENGLISH
Electromagnetic compatibility (EMC) environment
This equipment is for use in home healthcare fa-
cility environment.
This equipment is not likely to cause any harm-
ful interference in nearby equipment; however, it
can be impaired by electromagnetic (EM) inter-
ference emitted by other equipment, which can
lead to malfunctions. Do not use this equipment
where there is a risk that other electrical and/
or electronic equipment can interfere with this
equipment.
This equipment complies with the following
standards
IEC 60601-1-2:2014 Medical electrical equip-
ment - Part 1-2: General requirements for basic
safety and essential performance - Collateral
Standard: Electromagnetic disturbances - Re-
quirements and tests (EN 60601-1-2:2015)
EN 12182:2012, Clause 7, Assistive products for
persons with disability – General requirements
and test methods
EMC - WARNINGS
Use of this equipment adjacent to or stacked with
other equipment should be avoided because it
could result in improper operation. If such use is
necessary, this equipment and the other equip-
ment should be observed to verify that they are
operating normally.
Use of accessories, transducers and cables other
than those specified or provided by R82 could re-
sult in increased EM emission or decreased EM
immunity of this equipment and result in improp-
er operation. Several power plugs are supplied
with this equipment. Please use the correct pow-
er plug suitable for your country. Please chose
among the supplied power plug adaptor units:
English, Australian, EU, US/Japanese plugs.
Portable radio frequency (RF) communication
equipment (including peripherals such as anten-
na cables and external antennas) should be used
no closer than 30 cm (12 inches) to any part of
the , including cables specified by R82.
Otherwise, degradation of the performance of
this equipment could result.
Testing for EM disturbances (EM emission and EM immunity)
Test modes during emission tests:
1.
Movement mode (battery). Actuator running in/out
2.
Charging mode, actuator not running.
EM emission standards Classification/levels
Conducted and radiated RF emission CISPR 11 Group 1 (the product uses RF energy only for its internal
function)
Class B (the product is suitable for use in all establish-
ments, including domestic establishments and those
directly connected to the public low-voltage power supply
network that supplies buildings used for domestic pur-
poses)
Harmonic distortion
IEC 61000-3-2 Class A.
No testing performed, as the rated power for this equip-
ment is less than 75 W. No limits are specified for equip-
ment with a rated power of 75 W or less.
Voltage fluctuations and flicker
IEC 61000-3-3 dmax ≤ 4 % (without additional conditions)
Caribou