12
6. Installation
6.1 Transmitter installation
6.1.1 Antenna installation
Take out two pcs Transmitter antenna and fix them on the transmitter.
6.1.2 HDMI cable installation
One end of cable connect to the camera, another end of cable connect to the Transmitter.
6.1.3 power cable installation
Both of DC and AC power are supported by the receiver.
Support Sony NP-F970/770 battery.
Support DC-12V power, suggest the output power is more than 2A.
Connect to the power according to the requirement.
6.2 Receiver installation
6.2.1 Antennas installation
Prepared 4pcs receiver antennas, 2pcs of each style, fix them on the receiver according the photo
below:
Attention:
The receiver antenna is not a full direction antenna ,
For better transmit result, please make sure the antennas perpendicular to the ground.
Please operate refer to blow pictures .