R2 TST Series, Инструкция по эксплуатации и техническому обслуживанию, Страница: 16 / 20

(*note 5 mod. hi)
In this type of machines the tractor connection is supplied by the reseller. Address to the reseller for
the assembly connection instructions of the
Stoneburier R2- Tractor.
Fig. 21
Hydraulic circuit connection
A –
G1/2” main ports thread depth 15
mm
B –
G1/4” drain port thread depth 15 mm
WARNING: the hydraulic circuit must be connected in a way that the rotor (milling group)
turns in the opposite sense of the feed tractor (the stoneburier must turn in the opposite
sense of the wheels tractor.
Screw the hoses to the engine as indicated in Fig. 22, and fit them through the quick coupling to the
feed circuit and tractor drain.
Always wear gloves and protective glasses during
the fitting operations.
Fig. 22
A: Main port – INPUT
B: Main port – OUTPUT
C: Pipe – connecting feed hose (with sealing washer)
D: Feed hoses
E: Drainage (fitting with seal washer). Drainage port can be
found in the front or back part of the engine.
A
C
B
D
A
E
B
ENGLISH
16
16