R2 TST Series, Инструкция по эксплуатации и техническому обслуживанию, Страница: 14 / 20

Specific references for the hydraulic machines
(*note 1 mod. hi)
The TST hi have been designed to be
applied to hydraulic machines which
have an oil pressure between 150 and
180 bar.
1- Register adjustment roller (screw
crank )
2- Hydraulic motor
Fig. 19
(*note 2 mod. hi)
Model
TST 100 hi TST 113 hi TST 130 hi TST 150 hi
Maximum height from the ground 55 cm 55 cm 55 cm 55 cm
Oil pressure requested 150 - 180 bar 150 - 180 bar 150 - 180 bar 150 - 180 bar
Technical specifications of the hydaulic motor.
NOTE: the following data which concerns to the engine specifications are given by the manufacturer of the
hydaulic motor; for the specifications of the engine application to the R2 machine look at the previous table
and to the considerations of the following notes
Data
Valore (Funz. Cont.)
Geometric displacement (cm³/rev.)
102
Max input pressure (bar)
210
Max operating pressure (bar)
175
Max torque (daNm)
26
Max flow (l/min)
75
max rotating speed (rpm)
735
Max power (kw)
17
Max cont. Return pressurewithout drain line (bar) 0 ÷ 100 rpm
75
Max cont. Return pressurewithout drain line (bar) 100 ÷ 300 rpm
50
Max cont. Return pressurewithout drain line (bar) > 300 rpm.
25
Max return pressure with drain line (bar)
140
Max starting pressure with no load (bar)
12
Min. starting torque (daNm) at max. Δ P
21,5
1
2
ENGLISH
14
14