![background image](http://html1.mh-extra.com/html/r-v-r-elettronica/sdc100/sdc100_user-manual_3104853027.webp)
SDC100
23 / 42
User Manual
Rev. 3.0 - 09/10/01
9. Software Description
9.1
Software Installation (only with R.D.S. option)
The supplied software (the same for all the devices R.D.S. of the R.V.R. Elettronica
S.P.A.) has been planned in wise to simplify the use also by unpractised user;
every performance is complete with a different available options list in order to
reduce the difficult on setting.
In case of, for any reason, on the screen are nonsense indications or the PC jams,
we recommend to reset it and to repeat the procedure from the beginning.
The supplied software forecasts either the alphanumerical commands use or the
following ones:
TAB [] to go from a window to another one of the same screen;
UP/DOWN DIRECTIONAL ARROWS to run the different voices of an internal
list at one frequency or to go from a word to another one of a message or to
change place on the screen commands (ex. ABORT, CONFIRMATION,
MODIFY);
<ENTER> to select the desired function;
DEL to cancel some message characters and/or cody;
LEFT/RIGHT DIRECTIONAL ARROWS to change place into a message
word.
The firm R.V.R ELETTRONICA Spa supplies in kit a 3.5" DOS disk containing the
program which allows the total management of messages and ENCODER services.
For that it’s necessary an IBM compatible Personal Computer with RS232 serial
line and a 3.5" disk drive.
The management could be realized also during the SDC100 working on following
this procedure:
1)
Connect the serial cable between the PC and the 9 pins connector placed on
the front panel (REMOTE);
2)
Connect the PC to the power supply net;
3)
Switch on the PC and the stereo coder with optional R.D.S. board;
4)
When the promt appears on the screen (normally C:\), insert the supplied
disk (after made a copy) in the proper drive;
Содержание SDC100
