R.V.R. Elettronica PTX-DDS, Руководство пользователя

Страница: 47 / 58

43 / 54 User Manual Rev. 1.2- 24/01/11
PTX-DDS
7.5 Set up Reset
To reset completely the PTX-DDS to the factory set up, if necessary, follow the
next instructions.
The user must hold pressed the encoder, therefore switch on the PTX-DDS , it will
be displayed the following screen:
!!!ATTENTION!!!
If you press YES button all
data in a memory be reset
YES NO
Time remaning: 09 Second
Figure 7.31
In order to make the reset, it is necessary to move the encoder until the “YES”
label is highlighted, therefore press it. By pressing the encoder on the “NO” label
the user is brought back to the normal start up (see chap.7.2).
In any case after 20 seconds, without selection, the user is brought back to the
start up screen.
After you had pressed the “YES” label, when it is highlighted, will be displayed a
new screen with the percentage information of restoring operation.



 ╔════════════════════╗ 
 ║  ║ 
 ║  ║ 
 ║   ║ 
 ╚════════════════════╝ 

Figure 7.32