R.V.R. Elettronica PTX-DDS, Руководство пользователя

Страница: 34 / 58

30 / 54 User Manual Rev. 1.2 - 24/01/11
PTX-DDS
7.4.3.1 RF setting submenu (
RFset
)
This menu provides general the RF setting of the exciter.
| |RF :On | |
| |Freq. :000.000Mhz| |
| |F.Step:000 kHz| |
| |P.Out :000 % | |
| |Rise
t
:000
Sec
| |
| |FWD : 0.0 W | |
| |RFL : 0.0 W | |
| | Admin ---[Exit]---| |
Figure 7.18
RF
Selection of the equipment power status. The status can be set ON
(RF power output enabled) or OFF (RF power output disabled).
Freq
Selection of the working frequency. In case that the end of scale
comes reached during the setting, you will bring back to beginning
of scale. This editable parameter is expressed in megahertz.
F.Step
Selection of the step, for the regulation of the working frequency
expressed in kilohertz. The adjustment of the value is available
in step of 1, 10, 100 or 1000 kHz.
P.Out
Selection of the ouput power percentage desired from 0 (output
power disabled) to 100%.
Rise t
Selection of the duration time regarding the power ascent ramp.
The adjustment of the value is available step of 1 s from 0 to
10 s.
FWD
Visualization of the forward power expressed in Watt.
RFL
Visualization of the reflected power expressed in Watt.