6
/ 48
User Manual
Rev. 3.0 - 21/03/18
PJ5000U-K
4.4 Rear Panel Description
4.4.1 Rear Panel Description of PJ5000U-K
F3
F2
F1
RF OUT
50 Ohm
MAINS
C
O
MMO
N
B
U
S
IN
TE
R
LO
C
K
IN
TE
LE
METR
Y
SE
R
VI
C
E
I²C
B
U
S
R
F
IN
IN
TE
R
LO
C
K
O
U
T
[1] TELEMETRY
DB25 connector for telemetry
[2] INTERLOCK IN
Interlock input BNC connector: to inhibit the amplifier from an
external device, like a dummy load
[3] RF IN
RF input connector (“N” type)
[4] SERVICE
DB9 connector for factory parameters programming (only for
factory programming)
[5] MAINS
Plug for mains power supply
[6] PS1
Protection fuse of the power line 1
[7] PS2
Protection fuse of the power line 2
[8] PS3
Protection fuse of the power line 3
[9] COMMON BUS
DB15 connector for interfacing with other devices
[10] INTERLOCK OUT
Interlock output BNC connector: to inhibit an external device,
as an exciter. In case of fault, the inner connector is shorted
to ground
[11] I
2
C BUS
DB9 connector for I
2
C bus networking
[12] RF OUT
RF output connector (7/8” EIA flange)
