22 / 32
User Manual
Rev. 1.0 - 20/06/08
PJ500C-LCD, PJ700C-LCD & PJ1000light
6.3 Connectors description
6.3.1 Service (
for factory setting purposes only
)
Type: Female DB9
1
NC
2
TX_D
3
RX_D
4
Internally connected to 6
5
GND
6
Internally connected to 4
7
Internally connected to 8
8
Internally connected to 7
9
NC
6.3.2 Remote
Type: Female DB15
Pin Name
Type
Purpose
1
Interlock
IN
Inhibits power if closed to GND
2
Ext AGC FWD
IN
Ext. signal,1-12V, for power
limitation (AGC)
3
GND
Ground
4
SDA IIC
I/O
Serial for IIC communication
5
VPA Tlm
ANL OUT
PA supply voltage: 3.9V
F.S.
6
FWD Tlm
ANL OUT
Forward power: 3.9V F.S.
7
Power Good
DIG OUT
Signalling of the activation by the
grounding of the contact normally
open (chap. 5.4.1)
8
GND
Ground
9
GND
Ground
10 Ext AGC RFL
IN
Ext. signal,1-12V, for power
limitation (AGC)
11 SCL IIC
I/O
Clock for IIC communication
12 IPA Tlm
ANL OUT
PA power supply: 3.9V
F.S.
13 RFL Tlm
ANL OUT
Forward power: 3.9V F.S.
14 On cmd
DIG IN
A pulse towards ground (500 ms)
triggers power output
15 OFF cmd
DIG IN
A pulse to ground (500 ms)
inhibits power output
