15
lit, you can adjust by turning selector knob (21) and then press knob in to store.
20. Amperage control settings
PNL: Amperage set in LED display will be achieved when torch trigger is pressed.
Foot pedal – Amperage will be controlled by foot pedal up to amperage preset in LED
Remote torch: For torches with amperage control feature, when selected the machine will
provide amperage up to maximum preset in LED when torch control knob is turned
up/down.
21. Selector knob
When turned this will adjust main amperage as shown in display, it will also change
parameters when LED has been selected by using select function buttons. Once you have
adjusted parameter press knob in to save.
22. Welding Mode Select MMA or TIG
Press this button to select between MMA or TIG welding mode.
