R-Tech INV160, Руководство по эксплуатации

Страница: 10 / 18

10
This allows the machine to be calibrated to BS if required by your company
5. Amperage LED Display
This shows the preset wire feed speed when no welding is being carried out
When welding this shows the actual welding amperage
This allows the machine to be calibrated to BS if required by your company
6. Warning LED
This warning light will come on under these situations
Duty cycle of machine has been exceeded, the machine will stop working and the fan
will continue to run until machine has cooled down. The light will go off and welding
may be carried out again.
If duty cycle has not been exceeded the warning light comes on to warn of either
low input voltage has been sensed or there is an internal fault with machine
7. Power LED
This lights when machine is switched on