R Healthcare Technical Information Manual - Dash Page 50 March 2007 Revision B
Fitting Instruction
– Stump support right hand, left hand.
Originally developed for post operative below knee amputee care where keeping the stump horizontal improves the natural healing process.
This support also provides a comfortable long term option for some amputees who may continue to use a wheelchair for mobility, in some
circumstances.
Part number
Various
Where used
Dash Lite
Tools and Techniques
The following tools will be required;
None required
Service and maintenance check
At each service check for:
Worn, Damaged or contaminated pad
Poor location to side frame, indicating loose or worn fittings
Sharps or damaged tube
Corrosion areas on tube
Damaged or worn, components need to be replaced, if assembled in pairs Remploy Healthcare recommends replace both
assemblies, for continuity of wheelchair in use.
Removal method
Depress thump trigger located on under side of mounting plate in order to release lock.
Lift and remove from frame and discard
Fitting method
Offer replacement handed stump support to the front tube.
Locate moulding into front tube and rotate as far as possible so that the stump support is in line with the side
frame.
Release the thumb trigger so that the stump support locks in position.
Checking method
Twist Stump Support from side to side to ensure it is locked into position.
Minimal sideways movement on assembly.
Check that height adjustment has been set correctly for end user
Users and occupants should note that leg and stump supports should not be used as seat extensions, or occupant
Transfer support aides.
.
Cleaning Method
Wiped clean and dried using warm soapy water and cloth,
Use Assessment & Training
To be provided for use after assessment by clinically qualified therapist or rehabilitation engineer
When weight is on the front wheels, control of the wheelchair in an outdoor environment particularly going downhill can become
impossible, and this should always be avoided.
Caution and Limitations
1.
Care should be taken when mounting or removing the stump support to the metal frame
2.
Care should be taken when used outdoors, avoid obstacles and bumpy surfaces.
3.
Should only be used on clinically assessed patients.
Adjustment however should only be carried out by an authorised professional who understands the clinical requirements
.
Post code S41 8NJ
Weight excluding packaging: 2kgs per assembly.