R.G.V. DUETTO plus, Инструкция по эксплуатации и обслуживанию

Страница: 33 / 100

33
DUETTO pl
us
Make sure that the auger ( H ) is fitted on
the teflon coating and the metal washer
( X ) and that these are intact. Otherwise,
replace them by going to a point of
sales.
a4 - Insert the auger (H) in the infeed duct (B)
attaching it to the motor pin.
a5 - Insert the extended conical auger (G) on the
auger (H).
a6 - Insert the conical sieve (C) in the infeed duct (B)
positioning it as illustrated.
a7 - Tighten the ring nut (O) using your hands.
While tightening the nut ( O ) with the other
hand hold the infeed duct (
B
).
G
H
H
X
B
H
B
C
O
B