F451PL / MQ453PL – Porcelain Liner Installation / Removal
⚠
WARNING:
Failure to position the parts in accordance with these diagrams or failure to use only parts specifically
approved with this appliance may result in property damage or personal injury.
F451PL:
[1] Back Liner, [2] Side Liners
MQ453PL:
[1] Back Liner only
________________________________________
1.
Remove [2] DT Screws. Remove Grate from firebox.
2. Tilt back liner back slightly and enter firebox with top left
corner first.
3.
Carefully move back liner past pilot area.
4.
Back Liner is held in place by angle in top of firebox.
F451PL Side Liners:
5.
Place Side liners into firebox.
6.
Side Liners are held in place by retainer clips in upper
front corners of firebox.
See Previous Page.
⚠
Note: Warping and Discoloration of Porcelain or Painted Metal Liners Is Not Covered Under Warranty.
Both Porcelain and Painted Metal Liners may discolor and warp during normal operation of your appliance. This is
normal, and not considered a defect.
GRATE
23
Содержание Kingsman FDV451LP
