Qwic I am Electric, Руководство пользователя

Страница: 7 / 32

5
QWIC Electric bicycles Manual
1.3 Adjusting the pedal assistance
Use the arrows (button 3 and 4) to choose from 7 pedal assistance programmes
(0-6). Level 6 gives the most powerful assistance, whereas 0 means that the
pedal assistance is off. Keep in mind that using a more powerful pedal assistance
programme will discharge the battery quicker compared to a lower programme.
1.4 Powerlaunch
Use Powerlaunch when driving off. This will let you cycle for about 6 km/h without
having to peddle. Sit on the bike and, with both hands, grab the handlebars. Push
the ‘UP’ button but do not peddle. After a few seconds the engine will start. As soon
as you release the ‘UP’ button the Powerlaunch will be turned off.
1.5 Display lights
Press the ON/OFF button to switch the display lights on. Press ON/OFF again to
switch off.
1.6 Switch off
Press the ON/OFF button for 2 seconds to turn off the system.
Warning! You can only use the control panel when the battery is attached to
the bike. On the Smart-E the batterylock should also be in ‘ON’ position.
Warning! If the battery is in ‘OFF’ or you are using the bike without the battery,
random merits may be displayed because the engine drives small currents of
electricity. Ignore everything that is displayed when the system is off .
Warning! Only use Powerlaunch with both hands fi rmly gripped around the
handlebars. Powerlaunch is very powerful and dangerous when not seated
fi rmly on the bike.