Qvis APOLLOC4-500, Быстрый старт

Страница: 22 / 28

Copyright Qvis ®. All documentation rights reserved. 22
2.6.1.8 Slow playback and fast playback
Please refer to the following sheet for slow play and fast playback function:
Button Illustration Remarks
Fast play button

In playback mode, click this button to
switch between various fast play modes
such as fast play 1,fast play 2 and more. Frame rate may
vary due to
different versions.
Slow play button ►
In playback mode, click this button to
switch between various slow play modes
such as slow play 1 or slow play 2.
Play/Pause►
In slow playback mode, click this button
to switch between play/pause modes.
Previous/next In playback mode, you can click
│

and

to view previous or next video in current
channel.
2.6.1.9 Backward playback and frame by frame playback
Button Illustration Remarks
Backward play:

in playback
interface.
In normal playback mode, left click backward
play button

, system begins backward
playback.
Double click backward play button again,
system goes to pause mode.
When system is in
backward play or
frame by frame
playback mode, you
can click play
button
►
/

to go to
normal playback.
Manual playback
frame by frame. Click pause button in normal playback mode,
you can use

│
and
│

to view frame by
frame.
Note: All the operations here (such as playback speed, channel, time and progress) have
relationships with the hardware version.
2.7 Network Setup
Here is for you to input network information. See Figure 2-13.

IP address : Here you can input IP address.

DHCP : It is auto search IP function. When enable DHCP function, you can not modify
IP/Subnet mask /Gateway. These values are from DHCP function. If you have not enabled
DHCP function, IP/Subnet mask/Gateway display as o. You need to disable DHCP function
to view current IP information. Besides, when PPPoE is operating, you can not modify
IP/Subnet mask /Gateway.

TCP port : Default value is 37777.

UDP port : Default value is 37778.

HTTP port : Default value is 80.

Max connection : system support maximal 10 users. 0 means there is no connection limit.

Transfer mode : Here you can select the priority between fluency/video qualities.