Model #96015-xx: 34.94 lbs
97215-xx: 41.40 lbs
2. UNPACKING YOUR FAN
1. SAFETY RULES
Unpack your fan and check the contents. Do not discard the carton. If warranty
replacement or repair is ever necessary the fan should be returned in original packaging.
Remove all parts and hardware. Do not lay motor housing on its side - because the
decorative casing may shift. Check all visible screws, bolts and nuts for tightness.
Examine all parts. The following parts should be included:
CAUTION: DO NOT LIFT MOTOR ASSEMBLY BY THE OUTER RING.
LIFTING BY THE OUTER RING PORTION WILL LIKELY CAUSE DAMAGE.
1. Set of blades (15 pcs) (a)
2. Blade deco plates (15 pcs) (b)
3. Blade deco bars (15 pcs) (c)
4. Blade arms (5 pcs) (d)
5. Hanger bracket plate (e)
6. Hanging bracket (f)
7. Canopy (g)
8. Canopy cover (h)
9. Fan motor assembly (i)
10. Downrod assembly (6") (j)
11. Yoke cover (k)
11. Transmitter incl. 3V (CR2032) battery, 2 mounting screws and
holder (l)
12. Parts bags (m) containing:
Mounting hardware
(2 #14x3.5" wood screws, 2 star washers, 2 metal washers, 1
#12x3" wood screw, 1 metal washer, 3 wire nuts,)
Blade attachment hardwares (5 pcs)
Screw No. 1: Blade deco plate screws (5/32”x22mm) (31 pcs)
Screw No. 2: Blade deco bar screws (5/32”x10mm) (31 pcs)
Screw No. 3: Blade secure screws with fiber washers
(3/16"x7.5mm) (31 pcs)
Screw No. 4: Blade arm screws with lock washers
(1/4"x38mm) (6 pcs)
Screw No. 5: Blade arm screws with lock washers
(3/16"x15mm) (11 pcs)
NOTE:
Some Quorum fan models will have slightly
different parts than what is shown here
depending upon the design you have chosen.
Basic installation procedures are similar for
all models.
IF YOU FIND THAT PARTS ARE MISSING. CONTACT YOUR DEALER FOR REPLACEMENT, OR CALL QUORUM DIRECTLY AND WE WILL MAIL REPLACEMENTS TO YOU IMMEDIATELY.
1.
To avoid possible electric shock,
turn
off the electricity
at the main fuse box or
circuit panel before you begin the fan
installation or before servicing the fan or
installing accessories.
2.
Read all instructions and safety
information carefully before installing
your fan and
save these instructions.
3.
Make sure all electrical connections
comply with local codes or ordinances as
well as the National Electrical Code. If
you are unfamiliar with electric wiring,
please use a qualified and licensed
electrician.
4.
Make sure you have a location
selected for your fan which allows clear
space for the blades to rotate, and at lease
seven (7) feet of clearance between the
floor and the fan blade tips.
5.
The support structure must be securely
mounted and capable of reliably supporting
a minimum of 50 pounds (22.7 kg).
6.
WARNING
-
Support Directly from
the Building Structure.
7.
To reduce the risk of personal injury
use only approved hanging brackets and
screws supplied with the outlet box for
mounting to the outlet box.
8.
After installation is complete, check
that all connections are absolutely secure.
9.
Do not insert anything into the fan
blades while they are rotating.
10.
To operate the reverse function on
the fan, press the reverse button on the
transmitter while the fan is running.
11.
Do not attempt to control the
operation of the fan (or an optional light
kit) from any wall control that is not
approved by Quorum for use with its fans.
Do not use solid state wall controls. The
use of any unapproved control voids the
fan's warranty.
TOOLS REQUIRED
FOR INSTALLAITON
Phillips Screwdriver
Wire Cutters
Electrical Tape
Step Ladder
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
m.
l.
0
2
1
4
3
6
5