7. OPERATING YOUR TRANSMITTER
1. WALL AND FACE PLATES
• This fan is supplied with two finish wall and face plates for the control -
White and Almond.
• Select finish plates and attach to the control after installing the battery
and setting the frequency. (Fig. 17)
2. OPERATING TRANSMITTER
• “SPEED+” button - Is used to select fan speed. Press and release the
button of desired speed setting (speeds 1 through 6). Press the button to
increase the fan’s speed. A buzzer will beep when pressing the button
and will beep twice when highest speed is reached.
• “SPEED --” button - Is used to select fan speed. Press and release the
button of desired speed setting (speeds 1 through 6). Press the button to
decrease the fan’s speed. A buzzer will beep when pressing the button
and will beep twice when lowest speed is reached.
• “FOR/REV” button - Is used to change the rotation direction of the fan.
• “ON/OFF” button - Is used to turn the fan on and off.
• “LIGHT” button - Is used to turn the light on, off or to control the
brightness of the light. If the fan has no light kit, simply ignore
the light button.
To work the light, press and release the button and the light will turn
on or off. Press and hold the button for the desired brightness. The light
will cycle continuously between bright and dim settings as long as the
button is held down. The light key has auto resume; it will stay the same
brightness as the last time the fan/light was turned off.
• Memory function - If the fan and/or light are turned offby the wall
control, it will memorize and recover automatically to the same fan
speed and light brightness as it was the last time the fan/light was
turned off.
• This remote control is equipped with 16 code combinations to prevent
possible interference from other remote units such as garage door openers,
car alarms or security systems. If the fan or light kit turns on or off without
using the control, simply change the combination code in your transmitter.
Fig. 17
12V
S P EED+
S P EED-
FO R /R EV
ON /OFF
LIGHT
LIGHT
S P EED+
S P EED-
FO R /R EV
ON /OFF
