2
4
1
3
1. Drilling hole
Using the drill bit supplied, drill and tap
in one operation a threaded hole in the
waste pipe. Drill slowly so that the PVC
does not melt. Turn back anti-clockwise to
preserve the thread.
2. Fit connector
First try to screw the PVC connector in
the hole before fitting permanently with
PVC glue.
3. Connect hose to waste pipe
Slide the waste hose over the PVC
connector.
4. Connect hose to inlet combination
valve
Create a u-bend (or loop) in the hose
and connect it to the funnel of the inlet
combination valve. The u-bend will
create a water lock to block smells from
the waste pipe. As the water is being
heated, the inlet combination valve will
release drips of water into the grey funnel.
The open funnel is required to prevent
pressure build-up.
Connecting waste
The Quooker tank releases expansion water via the inlet combination valve which is fed into the
grey funnel. The funnel is connected to the waste pipe via the supplied waste hose. The drilling kit,
also supplied, can be used to make a connection onto the waste pipe.
It is important to keep the height distance between the inlet combination valve and the
connection to the waste pipe as large as possible to prevent waste water from flowing back.
D
As high
as
po
ssible
