1
3
2
4
1. Connect hoses
Connect the hot, cold and mixer water
hoses to the tap.
2. Tap through work top
Push the tap through the hole in the work
top.
3. Tighten the brass plate
Place the metal washer and threaded ring
around the hoses. Adjust the position of
the tap to ensure that the Quooker logo
is facing the user and fully tighten the
metal washer.
4. Securing tap screws
Tighten the threaded ring and secure
it with the two screws provided.
Fitting Flex tap
• When installing the tank it is necessary to take into account that the Flex tap counterweight
must be able to move up and down freely. When the hose is not withdrawn it hangs
approximately 40 cm below the work surface.
• Note: When fitting the tap to a thin work top use the white tap support before placing the
metal washer and threaded ring around the hoses.
B
3
