manualshive.com logo in svg

Quincy Compressor QED-1250, Инструкция, Страница: 7 / 116

Поделиться
Скачать
Quincy Compressor QED-1250 Скачать руководство пользователя страница 7

1

Safety precautions

1.1

Safety icons

Explanation

Danger to life

Warning

Important note

1.2

Safety precautions, general

General precautions

1. The operator must employ safe working practices and observe all related work safety

requirements and regulations.

2. If any of the following statements does not comply with the applicable legislation, the stricter

of the two shall apply.

3. Installation, operation, maintenance and repair work must only be performed by authorized,

trained, specialized personnel.

4. The dryer is not considered capable of producing air of breathing quality. For air of breathing

quality, the compressed air must be adequately purified according to the applicable
legislation and standards.

5. Before any maintenance, repair work, adjustment or any other non-routine checks, stop the

dryer, press the emergency stop button, switch off the voltage and depressurize the dryer. In
addition, the power isolating switch must be opened and locked.

6. Never play with compressed air. Do not apply the air to your skin or direct an air stream at

people. Never use the air to clean dirt from your clothes. When using the air to clean
equipment, do so with extreme caution and wear eye protection.

7. The owner is responsible for maintaining the unit in safe operating condition. Parts and

accessories shall be replaced if unsuitable for safe operation.

8. It is not allowed to walk or stand on the roof of the dryer canopy.
9. The service switch should only be operated by a trained service specialist from the

manufacturer.

Instruction book

2920 1992 00

5

Содержание QED-1250





















































































































Отзывы:

Нет отзывов