manualshive.com logo in svg

Quincy Compressor QED-1250, Инструкция, Страница: 60 / 116

Поделиться
Скачать
Quincy Compressor QED-1250 Скачать руководство пользователя страница 60

Access key

Different security levels are programmed in the regulator (e.g. user, service technician, etc). This
menu item is used to change the security level. Scroll to the correct icon using the scroll key.
Press the enter button. Press the enter button again to modify the security level. Press the enter
button again; a pop-up menu appears. Use the scroll keys to enter the password of the new
security level. Press the enter key to confirm the change.

User password

If the password option is activated, it is impossible for not authorized persons to modify any
setting.

• Using the Scroll keys, move the cursor to the Password icon.
• Press the Enter key.
• Select the Modify button using the Scroll keys and press the Enter key. Next, modify the

password as required.

Main chart settings

The main chart settings menu allows to adjust the scale and lines on the graph. To modify these
settings, proceed as follows:

• Select the Main chart settings icon as described above and press the Enter button (1).

Following screen appears:

Text on figure

(1)

Main chart

(2)

Main chart signal

(3)

Chart range

(4)

Minimum

(5)

Maximum

(6)

Chart band

(7)

Low

(8)

High

(9)

Off

Instruction book

58

2920 1992 00

Содержание QED-1250





















































































































Отзывы:

Нет отзывов