manualshive.com logo in svg

Quincy Compressor QED-1250, Инструкция, Страница: 63 / 116

Поделиться
Скачать
Quincy Compressor QED-1250 Скачать руководство пользователя страница 63

• Four different week schemes can be programmed.
• A week cycle can be programmed (a week cycle is a sequence of 10 weeks). For each week

in the cycle, one of the four programmed week schemes can be chosen.

Procedure

Starting from the Main screen (see 

Main screen

),

• Move the cursor to the Menu action button and press the Enter key. Use the Scroll buttons

to select the Timer icon.

• Press the Enter key on the controller. Following screen appears:

(1)

Week Timer

(2)

Week Action Schemes

(3)

Week Cycle

(4)

Status

(5)

Week Timer Inactive

(6)

Remaining Running Time

The first item in this list is highlighted. Select the item requested and press the Enter key on
the controller to modify.

Programming week schemes

• Select Week action schemes and press Enter. A new window opens. The first item in the list

is highlighted. Press the Enter key on the controller to modify Week Action Scheme 1.

Instruction book

2920 1992 00

61

Содержание QED-1250





















































































































Отзывы:

Нет отзывов