CONSIDERATIONS FOR INSTALLATION
Ÿ
The installation and testing operations must be performed solely by qualified
personnel in order to guarantee the proper and safe operation of the sliding door.
Ÿ
The company declines any responsibility for damage caused by incorrect
installations due to incompetence and/or negligence.
INSTALLATION
METHOD POSITIONING
2 WINGS
The center of the profile should
coincide with the center of the
opening passage.
1 WING
The center of the profile should
coincide with the end of the
opening passage or the end of
the profile should coincide wit the
end of the opening passage.
COVERALL FASTENING
Remove the cover. Drill holes on the front side of the coverall. it is recommended
not to exceed a distance of 600 mm between the holes.
WARNING
Protect the electronic equipment before you drill the holes, and
then wipe away any aluminum residues from the belt and the guide.
Calculate the measurements for the vertical dimension given by the height of the doors,
considering the vertical distance of the carriages. ( see coveralls dimensions )
Place the coverall parallel to the floor surface and mark the holes.
Provide holes for cable entry or open those pre-cutted. Fast the coverall to the wall
using screws (minimum diameter of 5.)
