background image

SAFETY PRECAUTIONS

These warnings are an essential, integral part of the product and must be given to the user. They

provide important indications on the installation, use and maintenance and must be read carefully.

This form must be preserved and passed on to subsequent users of the system. The incorrect

installation or improper use of the product may be dangerous.

INSTALLATION INSTRUCTIONS

•   The installation must be performed by professionally skilled personnel and in compliance with
 

current local, state, national and European legislation.

•   Before beginning the installation, check the integrity of the product.
•   The laying of cables, electrical connections and adjustments must be workmanlike performed.
•   The packing materials (cardboard, plastic, polystyrene, etc.) are a potential hazard and should
 

be disposed of correctly and not left within reach of children.

•   Do not install the product in potentially explosive environments or environments disturbed by
 

electromagnetic fields. The presence of inflammable gases or fumes is a grave danger to

 

safety.

•   Set up a safety device for overvoltage, a disconnecting and/or differential switch suitable for
 

the product and conforming to current standards.

•   The manufacturer declines any and all responsibility for product integrity, safety and operation
 

in the event incompatible devices and/or components are installed.

•   Solely original spare parts should be used for repairs and replacements.
•   The installer must provide all the information relating to the operation, maintenance and use of
 

the individual parts, components and system as a whole.

WARNINGS FOR THE USER

•   Read the instructions and enclosed documentation carefully.
•   The product must be used for the express purpose for which it was designed. Any other use is
 

considered improper and therefore hazardous. In addition, the information given in this

 

document and in the enclosed documentation may be subject to modifications without prior

 

notice. It is given as an indication only for product application. The company declines any

 

responsibility for the above.

•   Keep products, devices, documentation and anything else provided out of reach of children.
 

In the event of maintenance, cleaning, breakdown or faulty operation of the product, cut off the

 

power and do not attempt to operate on the product. Contact solely the professionally skilled

 

personnel responsible for these operations. Failure to adhere to the above indications may be

 

dangerous.

Содержание WINNY LIGHT





















Отзывы: