Quidway WB2011, Руководство пользователя

Страница: 99 / 157

System Clock Commands
6-19
6
Command Usage
The command specifies the facility type tag sent in syslog messages. (See
RFC 3164.) This type has no effect on the kind of messages reported by the
wireless bridge. However, it may be used by the syslog server to sort
messages or to store messages in the corresponding database.
Example
show logging
This command displays the logging configuration.
Syntax
show logging
Command Mode
Exec
Example
System Clock Commands
These commands are used to configure SNTP and system clock settings on the
wireless bridge.
Outdoor Bridge(config)#logging facility 19
Outdoor Bridge(config)#
Outdoor Bridge#show logging
Logging Information
============================================
Syslog State : Disabled
Logging Host State : Enabled
Logging Console State : Disabled
Server Domain name/IP : none
Logging Level : Error
Logging Facility Type : 16
=============================================
Outdoor Bridge#
Command Function Mode Page
sntp-server ip Specifies one or more time servers GC 6-20
sntp-server enable Accepts time from the specified time servers GC 6-20
sntp-server date-time Manually sets the system date and time GC 6-21
sntp-server
daylight-saving
Sets the start and end dates for daylight savings time GC 6-21
sntp-server timezone Sets the time zone for the wireless bridge’s internal clock GC 6-22
show sntp Shows current SNTP configuration settings Exec 6-22