manualshive.com logo in svg

Quidway V100R006C00, Руководство по настройке, Страница: 84 / 91

Поделиться
Скачать
Quidway V100R006C00 Скачать руководство пользователя страница 84

No.

Data

1

Domain name of the static IPv6 DNS entry and the corresponding IPv6 address

2

IPv6 address of the IPv6 DNS server

3

Domain name of the dynamic IPv6 DNS or the domain name list

 

6.3.2 Configuring a Static IPv6 DNS Entry

You can create a table of mappings between domain names and IPv6 addresses and add common
domain names to this table. When a client needs to use the IPv6 address corresponding to a
domain name, the client can search the table for the required IPv6 address. This improves the
efficiency of domain name resolution.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

ipv6

You can enable the IPv6 capability.

Step 3

Run:

ipv6 host

 

host-name ipv6-address

The host name and the corresponding IPv6 address are configured.

If the same host is configured with IPv6 addresses for several times (the maximum times is 8
IPv6 addresses), the IPv6 address configured earliest is used when needing to find the host with
the IPv6 address, such as ping this host.

----End

6.3.3 Configuring the Dynamic IPv6 DNS Services

To perform dynamic domain name resolution, you need a special domain name resolution server,
which runs a server program. This server provides mappings between domain names and IPv6
addresses and receives resolution requests from the client.

Context

If the IPv6 DNS server is configured with a link-local address, the interface name should also
be configured with the IPv6 address.

Figure 6-1

 DNS server connecting IPv4 and IPv6 networks

IPv4 link

DNS server

DNS IPv4 client

DNS IPv6 client

IPv6 link

Quidway S2700 Series Ethernet Switches
Configuration Guide - IP Service

6 IPv6 DNS Configuration

Issue 01 (2011-07-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

76

Содержание V100R006C00




























































































Отзывы:

Нет отзывов