2.6.2 Configure an IP Addresses for the Interface
The IP address assigned to an interface needs to be in the same network segment with the IP
addresses of the users of the VLANs associated to this interface.
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
interface vlanif
vlan-id
The VLANIF interface view is displayed.
Intra-VLAN proxy ARP can be enabled on only the VLANIF interface of the S2700.
Step 3
Run:
ip address
ip-address
{
mask
|
mask-length
}
The interface is configured with an IP address.
The IP address configured for the interface must be in the same network segment with that of
hosts in the VLAN associated with this interface.
----End
2.6.3 Enabling Proxy ARP Within a VLAN
To interconnect isolated users on a VLAN, you need to enable intra-VLAN proxy ARP on the
interface associated to the VLAN.
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
interface vlanif
vlan-id
The VLANIF interface view is displayed.
Step 3
Run:
arp-proxy inner-sub-vlan-proxy enable
Proxy ARP within a VLAN is enabled.
----End
2.6.4 Checking the Configuration
You can view the configuration of intra-VLAN proxy ARP.
Quidway S2700 Series Ethernet Switches
Configuration Guide - IP Service
2 ARP Configuration
Issue 01 (2011-07-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
18