l
GE 0/0/1 should be added to VLAN 2, and GE 0/0/2 should be added to VLAN 3.
l
To adapt to fast changes of the network and ensure correct forwarding of packets, dynamic
ARP parameters should be set on VLANIF 2 of the Switch.
l
To ensure the security of the server and prevent invalid ARP packets, a static ARP entry
should be created on GE 0/0/2 of the Switch, with the IP address of the router being 10.2.2.3
and the MAC address being 00e0-fc01-0000.
Figure 2-1
Networking diagram for configuring ARP
Internet
GE0/0/1
GE0/0/2
Switch
Server
LSW
Router
PC2
PC2
PC1
Configuration Roadmap
The configuration roadmap is as follows:
1.
Create a VLAN and add an interface to the VLAN.
2.
Set dynamic ARP parameters on a VLANIF interface at the user side.
3.
Create a static ARP entry.
Data Preparation
To complete the configuration, you need the following data:
l
GE 0/0/1 added to VLAN 2 and GE 0/0/2 added to VLAN 3
l
VLANIF 2 with the IP address being 2.2.2.2 and subnet mask being 255.255.255.0, aging
time of ARP entries being 60s, and number of detection times being 2
l
VLANIF 3 with the IP address being 10.2.2.2 and subnet mask being 255.255.255.0
Quidway S2700 Series Ethernet Switches
Configuration Guide - IP Service
2 ARP Configuration
Issue 01 (2011-07-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
23