Install (1) Clutch Bell Bearing Block to
the Left Frame half using (2) M3-8 Cap
Head Bolts.
Note:
The open side of the bearing
blocks must face opposing outward
direction.
Replacement Part #:
Clutch Bell Bearing Block – QD352
Install (1) 26mm Cross-member using
(1) M3-8 Cap Head Bolt
Replacement Part #:
26mm Cross-members (3) – QF368
Step 2 – Front Tail Transmission Installation
Install (1) Counter Gear to (1) Counter
Gear Shaft using (1) M4-3 Set Screw.
Making sure the setscrew hits the flat
on the Counter Gear Shaft.
Replacement Part #:
Counter Gear Assm. – QD351