QuickLabel Systems QLS-4100X, Инструкция по эксплуатации и установке

Страница: 58 / 118

QLS-4100 X 58
Test Print
1
2
3
The QLS-4100 X is equipped with a number of built-in test patterns used for check-
ing color alignment, print quality, and printhead integrity.
To perform a Test Print:
Press the NEXT or PREVIOUS key until the Test Print menu is displayed.
Press the + or - key until the desired test pattern is displayed.
The following test patterns are available:
• Test Pattern 1” to 5” - prints a crosshatch pattern to check print quality
• Block Pattern (All) - prints a spot color block pattern used for color alignment
• Proc. Block (CMYK) - prints a process block pattern used for color alignment
• Proc. Block (KCMY) - prints a process block pattern used for color alignment
• Horiz. Line Pattern - used to check printhead angularity
Press the SELECT key to confirm your choice.
The printer will immediately begin to print labels showing the selected test pat-
tern. Printing will continue until the printer is paused or the CANCEL key is pressed.
Pause: Test Print
Test Pattern:
1 in *