Quickie XTENDER, Руководство пользователя

Страница: 11 / 45

Sy
m
pt
o
m
Chair
slowing
down
Chair
won’t
move
Shortage
of
power
Sluggish
turning
Squeaks
and
rattles
Chair
veers
to
side
VIII. USE AND MAINTENANCE
11
ENGLISH
WARNING
The owner of this unit is responsible for making sure that it has been set
up and adjusted by a trained service professional under the advice of a
healthcare professional. The unit may require periodic safety and function
checks or certain in-use adjustments that can be performed by the owner,
caregiver or authorized dealer if desired. Always use parts and/or acces-
sories that have been recommended or approved by Sunrise Medical when
servicing this unit.
A. INTRODUCTION
1. Proper maintenance will improve performance and extend the use-
ful life of this unit.
2. Clean your unit regularly. This will help you find loose or worn
parts and make your chair easier to use. You will need a mild
detergent solution and plenty of cleaning rags.
3. If discovered, have loose, worn, bent or damaged parts replaced
before using the unit .
4. To protect your investment, have all major maintenance and repair
work done by your authorized dealer.
5 . Inspect and maintain this unit strictly per the safety checklist.
6 . If you detect a problem, make sure to order parts, or have service,
and repair work done at your authorized dealer before use.
7 . At least once per year, have a complete inspection, safety check,
and service of your unit made by an authorized dealer.
B. CRITICAL SAFETY CHECKS
1. Tire Air Pressure:
Check air pressure in pneumatic tires at least ONCE PER WEEK . The
wheel locks will not grip properly if you fail to maintain the air pressure
shown on tire sidewall.
2. Axles & Axle Sleeves :
When checking axles and axle sleeves every six months, make sure they
are clean and tight. Loose sleeves will damage the axle plate and will affect
performance.
3. Camber Tubes and Camber Plugs
Inspect the camber tubes and plugs every 6 months ensuring that all fasten-
ers are tight and that no parts have moved from their preset positions.
C. CLEANING
1. Paint Finish
a. Clean the painted surfaces with mild soap or detergent at least once
a month.
b. Protect the paint with a coat of non-abrasive auto wax every three
months.
2. Axles and Moving Parts
a. Clean around axles and moving parts WEEKLY with a slightly damp
(not wet) cloth.
b. Wipe off or blow away any fluff, dust or dirt on axles or moving parts.
3. Battery Backpack
a. Hand-wash (machine washing may damage fabric).
b. Drip-dry only. DO NOT machine dry as heat will damage fabric.
4. Basic Maintenance Materials available at local store
a. Tire pump
b. Tire pressure gauge
c. Clean rags or cotton cloth.
d Mild detergent.
NOTE - You do not need to grease or oil the unit.
Weekly 3
Months
6
Months
Annually
R
Tire inflation level
R
Wheel locks
R
Visually check for loose hardware
R
Axle and axle sleeves
R
Quick-release axles
R
Wheels, tires and spokes
R
Anti-tip tubes
R
Service by Authorized Dealer
Safety & Function Check
D. SAFETY CHECKLIST
NOTE
-
The user or caregiver should perform these weekly and
monthly checks to maintain the safety of their chair. If an item is
not working properly, please contact your authorized dealer.
Solution
E. TROUBLESHOOTING CHART
R R R R R
Make sure tire pressure is correct
and equal in both rear tires and front
caster tires, if pneumatic.
R R R R
Make sure all nuts and bolts are tight.
R R R
Make sure all spokes and nipples are
tight on radial spoke wheels.
R R R
Check Battery, Charge Battery, Reset
the Power on the unit.
MK-100156 Rev. B