18
Namely, “Eout8+ 1” is the output interface “Eou09”. “Eout8+ 2” is the output interface “Eou10”.
“Eout8+ 3” is the output interface “Eou11”, etc.
3.5.2 IO Function Instruction
Input signal function
Function Instruction
--
N/A.
Origin BTN
Input the reset signal into the unit by corresponding signal pin, and
the unit will run the reset (ORG) operation.
Stop BTN
Input the stop signal into the unit by corresponding signal pin, and
the unit stops the current operation.
Start BTN
Input the start signal into the unit by corresponding signal pin, and
the unit starts to work or pauses the current work.
Foot BTN
Input the foot switch signal into the unit by corresponding signal pin
and the unit runs the foot switch operation and the function is
similar with the “Start BTN”.
Safe flag-1
Input the signal “breakover ground” into the unit by corresponding
signal pin and the unit comes into the testing state (cannot move and
can only be programmed).
Safe flag-2
Input the signal “break over ground” into the unit by corresponding
signal pin and the unit comes into the testing state (cannot move and
can only be programmed).
Lack fault
Input the signal “lack fault” into the unit by corresponding signal pin
and the unit comes into the process, such as stop working, alarming
etc..
Block fault
Input the signal “block fault” into the unit by corresponding signal
pin and the unit comes into the process, such as stop working,
alarming etc..