5
Instruction version: 3
E0082/E0083 :
SuperNova LED light full instructions
Care and Cleaning Instructions
Never use and harsh or abrasive cleaners or brushes when cleaning this product as the product
could easily be damaged. Never submerge this item in water as it will penetrate the light and
possibly cause damage and invalidate your warranty.
Before cleaning ensure that the plugs in both ends of the light are fully inserted in place.
• Servicing
: This is an electrical component and as such it is recommended to get it checked
regularly. This is simply to ensure that the product is still running correctly and at the correct
performance. This service should only be done by a fully qualified technician.
• Care
: Please take care to ensure the product is not damaged in any way as this can impact
performance or cause a catastrophic failure. This care includes (but is not limited to)
scratches, dents, no dropping, water ingress, dirt and dust.
• Cleaning
:
• Light
: We recommend using a soft brush to brush any loose dirt off the lights. Then clean
with a damp , soft cloth ensuring taht you do not get water into either end of the light. Never
submerse the light in water. Then dry with soft lint free cloth..
• Plugs
: NEVER clean these with water or anythig damp as this will damage them and ALWAYS
unplug them before cleaning. If they do get dirty we recommend letting them dry first and then
simply brushing them down with a soft brush and wiping over with a completely dry absorbant
towel (such as kitchen towel).
• Cables
: We recommend simply brushing them down with a soft brush and wiping over with a
completely dry absorbant towel (such as kitchen towel).
• Remote Control
: NEVER clean this with water or anythig damp as this will damage them. If it
does get dirty/wet we recommend letting it dry first and then simply brushing it down with a
soft brush and wiping over with a completely dry absorbant towel (such as kitchen towel).
