Rev 1. 1 05/08/19
- 31 -
TELSEC
©
MP2 User Guide
9
Programming the System
Hovering on the Program menu will display the available program options. For all program pages the
system must save changes/additions to flash and do a reboot. When entering data, you will notice that
after pressing the Done button there will be a 60 second count down timer in the header. You will have
60 seconds to enter the next point information, which will reset the timer to 60 seconds again. You can
continue to add additional points in this manor or if you are completed, you can click on the Save and
Reboot button to save immediately instead of waiting for the time out. Note for the Modbus
programming option to appear in the menu, you must first enable Modbus on at least one of the serial
ports. See section 8.1.6
9.1
Input Programming
The program input page will show all inputs that have been defined with their current settings. The
point names are hyperlinks to bring up a window for changing the setting. The same window will appear
when selecting the “Add new point” button
Figure 42 - Defining Universal Inputs
