Quectel QuecOpen AG525R-GL Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 107

background image

Automotive Module Series

AG525R-GL QuecOpen

Hardware Design

AG525R-GL_QuecOpen_Hardware_Design 1 / 104

Our aim is to provide customers with timely and comprehensive service. For any assistance,

please contact our company headquarters:

Quectel Wireless Solutions Co., Ltd.

Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai
200233, China
Tel: +86 21 5108 6236
Email: [email protected]

Or our local office. For more information, please visit:

http://www.quectel.com/support/sales.htm.

For technical support, or to report documentation errors, please visit:

http://www.quectel.com/support/technical.htm
Or email to [email protected].

General Notes

Quectel offers the information as a service to its customers. The information provided is based upon
customers’ requirements. Quectel makes every effort to ensure the quality of the information it makes
available. Quectel does not make any warranty as to the information contained herein, and does not
accept any liability for any injury, loss or damage of any kind incurred by use of or reliance upon the
information. All information supplied herein is subject to change without prior notice.

Disclaimer

While Quectel has made efforts to ensure that the functions and features under development are free
from errors, it is possible that these functions and features could contain errors, inaccuracies and
omissions. Unless otherwise provided by valid agreement, Quectel makes no warranties of any kind,
implied or express, with respect to the use of features and functions under development. To the maximum
extent permitted by law, Quectel excludes all liability for any loss or damage suffered in connection with
the use of the functions and features under development, regardless of whether such loss or damage
may have been foreseeable.

Duty of Confidentiality

The Receiving Party shall keep confidential all documentation and information provided by Quectel,
except when the specific permission has been granted by Quectel. The Receiving Party shall not access
or use Quectel’s documentation and information for any purpose except as expressly provided herein.
Furthermore, the Receiving Party shall not disclose any of the Quectel's documentation and information
to any third party without the prior written consent by Quectel. For any noncompliance to the above
requirements, unauthorized use, or other illegal or malicious use of the documentation and information,
Quectel will reserve the right to take legal action.

«
1
2
3
4
...
»

Содержание QuecOpen AG525R-GL












































































































Отзывы:

Нет отзывов

Похожие инструкции для QuecOpen AG525R-GL

Бренд: Olsberg Страницы: 68

Бренд: Rain Bird Страницы: 24

ESP-LXIVM Series

Бренд: Rain Bird Страницы: 16

Бренд: Rabe Страницы: 61

Бренд: Racal Instruments Страницы: 35

Бренд: Saluki Страницы: 13

Бренд: hager Страницы: 4

Бренд: Bettis Страницы: 18

Бренд: EisSound Страницы: 10

SmarTemp Control fx

Бренд: Webasto Страницы: 8

Devicenet R7F4HD-DAC32C

Бренд: M-system Страницы: 9

Бренд: Universal Remote Страницы: 10

Entelli-Switch 250

Бренд: GE Страницы: 32

Бренд: Ublox Страницы: 58

Бренд: Kohzu Precision Страницы: 58

XDOM TAKE 6 IR/RF - PRODUCTSHEET

Бренд: Ebode Страницы: 88

NETBuilder II DPE 80

Бренд: 3Com Страницы: 32

Бренд: 4IPNET Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды