GNSS Module Series
LC29D_EVB(0)_User_Guide 30 / 42
PC
GNSS
Antenna
Switch to RTK
4G
Antenna
Type-B USB cables
Figure 23: EVB and Accessories Assembly-2#
7.1.2.2.
Module Configuration Method
Step 1:
Connect Type-B USB cables and PC as shown in
Figure 23
above.
Step 2:
Run the provided driver installer to install the USB driver.
Step 3:
Flip the power switch (S101) to the
ON
position to power on the EVB.
Step 4:
View the USB port numbers in the Device Manager, as shown in the figure below.
Figure 24: USB Ports-2#
Step 5:
Start the QGNSS and click “
Setting
” and “
Serial Port Configuration
”. Select “
Standard COM
Port (COM4)
” for “
Port
” and “
115200
” (the LC29D module supports 115200 bps by default) for “
Baud
Rate
”, as shown in the figure below.
