Wi-Fi&Bluetooth Module Series
FCM561D-P_Hardware_Design
65 / 65
requirements required with this module installed (for example, digital device emissions, PC
peripheral requirements, etc.).
Validity of using the module certification:
In the event that these conditions cannot be met (for example certain laptop configurations or
co-location with another transmitter), then the FCC authorization for this module in combination with
the host equipment is no longer considered valid and the FCC ID of the module cannot be used on
the final product In these circumstances, the OEM integrator will be responsible for re-evaluating the
end product (including the transmitter) and obtaining a separate FCC authorization.
End product labeling
:
The final end product must be labeled in a visible area with the following: "Contains Transmitter
Module
FCC ID: XMR2023FCM561DP
"
Information that must be placed in the end user manual:
The OEM integrator has to be aware not to provide information to the end user regarding how to
install or remove this RF module in the user's manual of the end product which integrates this
module The end user manual shall include all required regulatory information/warning as show in
this manual.
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :(1) l’appareil ne doit
pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
The device is compliance with RF field strength limits, users can obtain Canadian information on RF
exposure and compliance.
IC Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
D
é
claration d
’
exposition aux radiations:
Cet
é
quipement est conforme aux limites d
’
exposition aux rayonnements IC
é
tablies pour un
environnement non contrôl
é
. Cet
é
quipement doit
ê
tre install
é
et utilis
é
avec un minimum de 20
cm de distance entre la source de rayonnement et votre corps.
